A box with an elegant design and impeccable construction, made of paddouk wood and steel and with attention to the smallest details. It is part of the "built-in" box category, designed to house atom-tanks while maintaining small dimensions.

This version of the Vertebra has been specially designed for the Vampire atom as deck height and air hole positioning. Of course it can accommodate other 22mm atoms.

It is powered by a single 18650 battery.

The cup has a diameter of 22mm and, as in every Paiano box, is fitted with a self-adjusting spring pin.

The Vertebra is a mechanical box, it mounts the FET mosfet, which allows you to regulate its activation, guaranteeing further safety to the system.

LED information and functions

- Low resistance protection: when the resistance is 0.08 ± 0.01Ω The LED flashes 3 times and does not power the mosfet.

- On / Off function: When it is off, 5 clicks are activated and the LEDs blink 5 times. If active, 5 clicks go out and the LED blinks 5 times.

- Low voltage: when the battery is less than 3.1 ± 0.1V the LEDs flash 10 times and do not power the mosfet.

- Timeout protection: if the mod is activated for 10 ± 1s, the LEDs flash 8 times and it will cut off the power supply of the mosfet.

- In use: when you turn on the mosfet, the LEDs will light up.

- Short circuit protection

Product recommended only for experienced users; it is recommended to trust the maximum amperage of the batteries used, and it is not recommended to use rewraped batteries (type AWT, Efest, IMREN, Efan Sony vtc5A) with resistances not below 0.25 ohm.

Attention:

By adding this product to the cart, the user confirms that he is familiar with Ohm's law, and all the necessary precautions regarding battery safety.

A box with an elegant design and impeccable construction, made of paddouk wood and steel and with attention to the smallest details. It is part of the "built-in" box category, designed to house atom-tanks while maintaining small dimensions.

This version of the Vertebra has been specially designed for the Vampire atom as deck height and air hole positioning. Of course it can accommodate other 22mm atoms.

It is powered by a single 18650 battery.

The cup has a diameter of 22mm and, as in every Paiano box, is fitted with a self-adjusting spring pin.

The Vertebra is a mechanical box, it mounts the FET mosfet, which allows you to regulate its activation, guaranteeing further safety to the system.

LED information and functions

- Low resistance protection: when the resistance is 0.08 ± 0.01Ω The LED flashes 3 times and does not power the mosfet.

- On / Off function: When it is off, 5 clicks are activated and the LEDs blink 5 times. If active, 5 clicks go out and the LED blinks 5 times.

- Low voltage: when the battery is less than 3.1 ± 0.1V the LEDs flash 10 times and do not power the mosfet.

- Timeout protection: if the mod is activated for 10 ± 1s, the LEDs flash 8 times and it will cut off the power supply of the mosfet.

- In use: when you turn on the mosfet, the LEDs will light up.

- Short circuit protection

Product recommended only for more experienced users; it is recommended to trust the maximum amperage of the batteries used, and it is not recommended to use rewraped batteries (type AWT, Efest, IMREN, Efan Sony vtc5A) with resistances not below 0.25 ohm.

Attention:

By adding this product to the cart, the user confirms that he is familiar with Ohm's law, and all the necessary precautions regarding battery safety.