VP MOD BY VINCENZO PAIANO VERTEBRA Paddouk

Functions and information LED
- Low resistance protection: when the resistance is 0.08 ± 0.01Ω The LED flashes 3 times and does not power the mosfet.
- On/off function: When switched off, 5 clicks are activated and LEDs flash 5 times. If active, 5 shots turn off and the LED flashes 5 times.
- Low voltage: when the battery is less than 3.1 ± 0.1 V LEDs flash 10 times and do not power the mosfet.
- Timeout protection: if the mod is activated for 10 ± 1s, the LEDs flash 8 times and will stop the power of the mosfet.
- In use: When you turn on the mosfet, the LEDs will turn on.
- Short circuit protection

Recommended product only for more experienced users; it is recommended to make the maximum amplification of the batteries used, and we do not recommend the use of rewrappate batteries (type AWT, Efest, IMREN, Efan Sony vtc5A) with resistances not below 0.25 ohm.

Attention:
By adding this product to the cart, the user confirms that he knows Ohm's law, and all necessary precautions on battery safety.

A box with elegant design and impeccable construction, made of wood paddouk and steel and treated in detail. It fits into the category of "mounted" box, designed to accommodate the tank atoms while maintaining small dimensions.
This version of the Vertebra has been specially designed for the atom Vampire as deck height and air holes positioning. Of course it can accommodate other atoms from 22mm.
It's alimented by a single 18650 battery.
The cup has a diameter of 22mm and, as well as in each Paiano box, mounts a self-adjustable spring pin.
Vertebra is a mechanical box, mounts the FET mosfet, which allows to adjust its activation, ensuring additional security to the system.